Ubuntu not recognizing Pixhawk
did you add your user to the dial out group? (though I am unsure if that would help) I need to test that theory sudo adduser <username> dialout
View ArticleUbuntu not recognizing Pixhawk
PS: make sure you have a valid formatted SD card inserted
View ArticleAPM Planner 2.0.20 stable version released
A post was split to a new topic: Download APM Planner gets 2.0.18
View ArticleDownload APM Planner gets 2.0.18
There's an issue when we migrated to the new ardupilot.org site and the new 2.0.20 build didn't get copied over. [ADDED LATER[ It's fixed for OSX, i'll do win and linux in the morning (PDT)...
View ArticlePixhawk Crash in Mid-air after flying stably
Hi Guys, I got a reply from the DIYDrones post on the same issue. Its as below: "I would check motor/ESC #1 for damage and function. From the log the autopilot throttle up motor #1 and throttled down...
View ArticleBad or no terrain data but GPS is disabled
Hi Paul, done and works! That was the missing check to be disabled. Thank you very much!
View ArticleLog Download
im not sure why, but the reason for the fails are timeoutsit takes almost 10 seconds for the pixhawk to respond, do you have your data rates in MP set high?
View ArticleLog Download
ive looked more, and its not a data rate issue, i think there maybe something wrong with your microsd card.
View ArticleTuning large 36Kg X8 drone - seeking advice
Hi chuckntaylor, I have a bunch of parameter changes I would like you to try before we try my autotune changes. I can see some higher frequency oscillation in your quad at 11 and 17 Hz. I suspect we...
View ArticleTuning large 36Kg X8 drone - seeking advice
Hi Mike, Large is now 30+kg. I too have a medium copter at 10kg. Things have changed a lot over the last year or so haven't they
View ArticleAPM 2.6 No output to LEDs on Aux pins
Thanks for replying. The only documentation I can find, is that posted bymembers of other forums, but none have in dicated that there might be ant problem. I've installed it using the illustrations...
View ArticleLarge Octo crash during auto tune
Hi mboland, I have looked at your log and the pixhawk is commanding full opposite roll and I can see it is being output to the motors. This looks like a hardware or esc failure. This is a little...
View ArticleGPS has not been fully configured
Are you outside with a solid GPS Lock before you arm.
View Article